connected?
Q. Ok...So i open up internet explorer, and i click on a link that opens up a new window, but when i close EITHER of the two windows, they both close. How do is top this? ctrl+n doesnt work. And theres no X in the tab if theres only 1...let me say this again. it opens up a new window, by window i mean like if i open up internet explorer again
Asked by Soul_of_the_Keyblade - Thu Jan 3 00:19:43 2008 - - 2 Answers - 0 Comments

A. Don't hit the big X on top right. Hit the X on the individual tab
Answered by JD7 - Thu Jan 3 00:33:51 2008

How do i connect my new laptop to the wireless router i have connected to my desktop pc?
Q. Just purchased a new laptop which has a wireless card. My desktop is connected via wireless router. Do i need to get anything for my laptop for it to read the wireless router or is the card within sufficient? How do i connect it to the router? Its not detecting the linksys i have connected to my desktop. Thanks.
Asked by Andre E - Thu Jun 11 11:04:34 2009 - - 3 Answers - 0 Comments

A. Hi. Go to the Control Panel and run the Wireless Setup Wizard.
Answered by Cirric - Thu Jun 11 11:10:20 2009

How is the generator connected to the jet engine in a passenger jet?
Q. I know that in some systems, the engine drives a hydraulic pump that then drives a hydraulic uh... "motor" that turns the generator, but can you please explain this to me in more detail? I especially can't understand how the hydraulic pump is connected to the engine - is it connected to the shaft in the middle of the engine (the one that connects the compressor and turbine blades)? If so, how? Doesn't it turn at tens of thousands of RPM? This is really my question - in a nutshell, how do you connect a generator or pump to a jet engine?
Asked by lmf7000 - Sun Apr 19 18:30:16 2009 - - 6 Answers - 0 Comments

A. Good responses above. Not all engines include constant speed drives (CSDs) however. Some engines drive the generator directly and use a voltage regulator to maintain proper power to the aircraft. In this case, the gearbox is driven by a bevel gear on the HP shaft through a smaller, perpendicular, accessory drive shaft to an external gearbox, which then uses a series of bevel and spur gears to reduce the speed by roughly an order of magnitude to several accessories, including a starter/generator, hydraulic pump, oil pump, fuel control, etc. By the time the speed reduction occurs, there is not much difference between flight idle and max speed at the generator pad, so a CSD is just added weight for little justification.
Answered by Larry454 - Sun Apr 19 21:35:26 2009

How do i connect my iMac to a printer connected to a windows computer?
Q. My printer model is HP Laserjet 1018 it is connected to my windows computer using a USB cable.
Asked by iMacperson540 - Wed Mar 18 21:46:09 2009 - - 1 Answers - 0 Comments

A. Try this:
Answered by Canolli - Wed Mar 18 22:05:31 2009

How can i get connected to the internet on my iPod touch?
Q. I just got my iPod touch & want to get connected to the internet but idk wut the password is. Is there any other way to get it connected?
Asked by Taylor B - Tue Dec 30 02:50:17 2008 - - 2 Answers - 1 Comments

A. you need a router in your house. =]
Answered by Steff - Tue Dec 30 02:56:01 2008

What are the cords connected to the power button of a computer called?
Q. I am fixing my friends computer and I can't remeber what the cords connected to the power button are called. It is like a little wiring, one end is a connector that connects to the motherboard and the other end is the actual power button. The computer is a Gateway desktop model number:510. Thanks.
Asked by Tammy Z - Fri Dec 11 17:44:16 2009 - - 1 Answers - 0 Comments

A. In most, PWR + and PWR - RST + and RST -
Answered by Tater - Fri Dec 11 17:50:23 2009

Is it ok to leave a wire connected to the negative car battery terminal?
Q. I have an air horn (siren) that I started hooking up to my car today but didnt finish all the wiring. Connecting the positive wire was fine but connecting the negative wire was a b**ch, so I dont want to disconnect it. Is it ok to leave the wire connected to the negative car battery terminal with no positive connection?
Asked by C. A. - Mon Mar 17 23:59:24 2008 - - 4 Answers - 0 Comments

A. Sure just keep the other end of the wire connected to it's spot or tape it JUST in case it wants to touch the positive terminal. Now like yousaid the positive is another problem all together.
Answered by Uncle Red - Tue Mar 18 00:04:28 2008

How can I keep myself connected to a wireless internet connection?
Q. Everytime I close my laptop I have to go through this whole process just to get connected back online. When I close and everything is ok, I come back later and open it. I get a message saying that I have very little to no connection. How can I just keep it connected instead of having to go through the process of running the Wireless Zero Configuration?
Asked by Mike - Sun Apr 13 21:43:41 2008 - - 1 Answers - 0 Comments

A. You have to be somewhere near your wireless router. When you close your laptop, also make sure that your setting of "What happens when I close the lid of my laptop" is set to "Do nothing." I think the default setting is it will sleep or hibernate. If that is not the issue, you might need to contact your technical support group in your office or the company providing you internet. You can also check the manual of your wireless router (if it's yours) to know up to how many meters away can you stay to get signal. Sometimes, the connection seems okay. But after a while, the connection can be lost because of interferences like microwaves ovens.
Answered by Miguel - Sun Apr 13 22:07:52 2008

Can computer connected through router see workgroup on computers connected to modem?
Q. Here's the situation: I have a modem which have 4 connections. 1 of them is connected to a wireless router and 3 others to computers. When I connect to the router, I can see the workgroup computers of others who use wireless. However, I can't see the workgroup computers of those connected to the modem. Any way to solve this?
Asked by wwwdrecom - Thu Apr 23 01:00:55 2009 - - 2 Answers - 0 Comments

A. you might want to try switching your connections around, try connecting the computers to the router and connect the modem to the port on the router specifically for modems (IE: a linksys router has a modem connection to the left of the other ones, separate). Also, if this isn't your problem, make sure all the computers are in the same workgroup.
Answered by sitryor - Thu Apr 23 02:32:19 2009

How does a connected TV to a computer, display different things than the computer monitor?
Q. I am writing a java program, and I want your help for what I want to do. What I want to do is: I have a computer and a TV. They are connected to each other. I want to see on TV screen something specific, let's say a video, but I do not want to see it on my computer screen, too. What should I look for? Any idea? Thanks!
Asked by George - Tue Mar 30 08:59:05 2010 - - 1 Answers - 1 Comments

A. Your computer doesn't treat them any differently. Just drag the stuff you want on each screen to the screen you want.
Answered by Meh - Tue Mar 30 09:03:32 2010

Can i connect a laptop to internet through an ethernet cable connected to PC?
Q. My Pc is connected to the internet through a speedtouch 330 modem. I then plug in an ethernet cable into my computer and use it to access xbox live. But when i plug this ethernet into my laptop i do not know how or if i can connect to the internet using this.
Asked by jamie_cotter - Sat Dec 13 14:35:07 2008 - - 2 Answers - 0 Comments

A. You want to buy a multi port Router 1 Port for the Desktop PC 1 Port for the Laptop 1 Port for the XBOX 360 5 open ports for future expansion Plug the Desktop PC, Laptop, XBOX 360 into the LAN ports. Each individual device will need an ethernet cable. You will plug the ethernet cable coming from the Modem into the WAN port of the Router.
Answered by Tony M - Sat Dec 13 14:41:45 2008

How do I access the computer that is connected to my wireless router through my laptop?
Q. I have a wireless router. The wireless router is connected to my DSL modem and my desktop home PC. My desktop is connected to the router physically with an ethernet cable and accesses the internet as such. I also have my laptop which I use to connect to the wireless router, wirelessly. My question is, how or can I access my desktop PC to go through files, etc, via my laptop?
Asked by mtdew120 - Sun Dec 9 16:18:57 2007 - - 2 Answers - 0 Comments

A. What you do is Share folders. Go to the PC and right click the folder you want to share (I Normally share Drive C: but if you don't have a sequrity key on the router its not recomened. right click on it the click "proerties" then the sharing tab on the display box. click the apporite bothen click ok. Now go to the laptop then find My Network Places its usually in the Start menu and could be on the desktop. there you will see a folder lke this "K: on \\PC" Where K is the folder and \\PC is the name of the pc.
Answered by Aaron B - Sun Dec 9 16:30:45 2007

How can I get my computer connected to the internet through Ethernet ports?
Q. It knows the ethernet cable is there because every time I unplug it, it X's out. Its enabled and everything. Right now I have it connected to a verizon router that is 100% connected to the internet. Im online now with a wireless card. But Cant get the ethernet connection to pick up internet. How can I get the internet through the ethernet port without the wireless card
Asked by Steven - Mon Apr 26 20:10:36 2010 - - 2 Answers - 1 Comments

A. There may be a conflict of interest with the wireless and the cable. The port settings on your computer may be incorrect with what settings are on the router. Software needs to be installed for the router and the computer to "talk" to each other. This is a little over my head. I'm a hardware guy and out of practice. Call your internet service provider and the designer of your router.
Answered by JLJohnson - Mon Apr 26 20:15:09 2010

How is the evolution of photosynthesis connected to the endosymbiotic theory?
Q. Does anybody know how is the evolution of photosynthesis connected to the endosymbiotic theory? I think evolution and photosynthesis are two theories about origins of life on the Earth, but I don't understand how they could be connected.
Asked by Nataly D - Tue May 20 14:21:33 2008 - - 1 Answers - 0 Comments

A. First let me correct your last statement. Evolution is a theory about the origins of biological diversity on earth. Photosynthesis is a process by which plants and other organisms convert light energy into chemical potential energy that organisms can use for cellular processes. As we usually think about it, photosynthesis allows plants to "fix" the carbons from carbon dioxide into sugars. Fortunately for us, we have a way to break down the sugars in starch, and convert that chemical potential energy back into something we can use directly for stuff we want to do (e.g. ATP to allow you to move, think, build stuff, and reproduce). Endosymbiosis starts out with one cell engulfing another. Usually when a cell does this, it digests the… [cont.]
Answered by Trent Smith - Tue May 20 14:56:20 2008

How do I make my browser work when my computer is connected to my wireless router?
Q. Windows XP. Linksys WRT54G. When my internet cable is plugged directly into my computer from the wall, my computer obtains an IP address and connects to my browser no problem. When I plug the cable from the wall into my router and then from the router into the computer, it also obtains a IP address, says I'm connected but my browser will not work. This also happens when I connect to it wirelessly. So basically, when I go directly from the modem to my computer my internet works fine, but when I go through to router, it says it's connected (Internet and WLAN light are both on as well on the router) and has IP address but the browser will not work. I've tried so many things, please help!!!
Asked by Luke K - Thu Aug 23 12:42:21 2007 - - 5 Answers - 0 Comments

A. make sure it gets IP Address, Gateway, & DNS. go to Start > Run > type CMD to open command prompt, then type ipconfig /ALL, make sure the adapter has tcp info. Also don't use wireless and ethernet at the same time, 1 or the other, if you plug your ethernet in, disable the wireless, if you use wireless don't plug in the ethernet. Make note of those IP Addresses, then from the copmmand line ping the default gateway ip (ie.. ping 192.168.1.1) or whatever your gateway IP is. if that works you can communicate with the router. Next ping an external host such as ping yahoo.com, if it fails ping the IP...ping 66.94.234.13 if that works its a bad DNS Server
Answered by Z - Thu Aug 23 12:58:59 2007

Does the iphone stay connected to the internet if you start an application and it locks?
Q. Yesterday night I plugged my iphone in to charge. I must have pressed clocks when I put it in as this morning when I woke up, 8 hours later, and unlocked the phone clocks was the first thing to show up on screen. Does that mean that the internet was connected all night or does it disconnect when it locks?
Asked by crissy r - Fri Jul 18 20:36:34 2008 - - 1 Answers - 0 Comments

A. the phone can stay connected to the internet until you press the home key if the phone is n sleep mode or "locked" the phone is not connected to the internet tho it can be set to fetch data on a regular basis despite sleep mode state, but this isn't something you can accidental do. i wouldn't worry about it if it's in sleep mode of if you've at least returned to the home screen.
Answered by Alpha Male - Sat Jul 19 03:53:04 2008

How do I share files between computers connected via a Router?
Q. Hi, I've got a desktop connected to a wireless router via a cable (I believe they're called cat5's or something), and a laptop connected to that wireless router via wifi. Is it possible to share files between my two computers? If so, how?
Asked by Jessie S - Wed Jan 28 03:50:14 2009 - - 4 Answers - 0 Comments

A. you just need to configure the folder you want to share,,, how, right click the folder you want to share and click on sharing and security then...on network sharing and security check the box "share this folder on the network" type any names you want... you can also drag and drop the files you want to share the the "Shared folder"
Answered by JMnemonic - Wed Jan 28 04:01:20 2009

How do I keep my wirless Internet Connected at all times on my laptop?
Q. I recently purchased a new laptop. It automatically connects to my wireless internet at home and has a great signal but it frequently goes in and out of a connection. How do I keep it connected at all times?
Asked by Kim F - Wed Aug 20 12:46:04 2008 - - 1 Answers - 0 Comments

A. You are most likely too far from the wireless router, sit closer to the wireless router or move the wireless router close to you. There could also be something interfering with the signal, check between YOU and the ROUTER and see if there are any electrical devices that you can move out of the way.
Answered by MikeTwo - Wed Aug 20 12:51:37 2008

What is the current through the parallel connected resistors?
Q. 3 resistors of 4, 6, and 10 ohms are connected in parallel. If the combination is connected in series with a 12 V battery and a 2 ohm resistor, what is the current through the 10 ohm resistor?
Asked by Jen - Fri May 23 01:42:08 2008 - - 3 Answers - 0 Comments

A. Given: R4= 4 ohms R6= 6 ohms R10= 10 ohms R2= 2 ohms RT = Total parallel connection I = current of the circuit E = voltage = 12 RT = R4 R6 R10 / (R4 + R6 + R10) RT = 120 / (4 + 6 +10) RT = 120 / 20 RT = 12. .ohms RE= resistance equivalent RE = RT + R2 RE = 12 + 2 RE = 14. .ohms E = I x R I = E / RE I = 12 / (14) === Ans: I = 6 / 7 amp ===
Answered by Lim E - Fri May 23 03:23:46 2008

My computer is connected to the internet but my browser fails to connect. What to do?
Q. I have a laptop with Windows Vista SP1. My computer is connected to the internet via wireless/lan (Skype, for example, is working fine) but my browser (IE/firefox) doesn't show anything, as if not connected. I tried virus scan, hijackthis, disabling and enabling network card, defrag. Does anyone have any idea how to solve this situation. Thanks in advance.
Asked by Wallabee - Tue Dec 2 23:34:24 2008 - - 3 Answers - 0 Comments

A. Access your router's default IP address may be something like 192.168.0.1 depending on the router brand/model, and just restore everything to factory settings/defaults.
Answered by Carey Wilson - Wed Dec 3 00:59:38 2008