What is the overdrive indicator light means in your car engine ?
Q. I found a symbol that said "O/D OFF" appeared on my car and it's called "Overdrive-off indicator light". Can anyone tell me what it is and what cause it appear that suddenly ?
Asked by missybitsy - Sun Sep 9 16:55:44 2007 - - 4 Answers - 0 Comments
A. Overdrive doesn't have anything to do with the engine. It does have to do with the transmission. It gives you the option of moving slower with more power, or faster with less. The control is usually on the gearshift. You, or a passenger, probably bumped it.
Answered by Brooke B - Sun Sep 9 17:06:44 2007
Q. I found a symbol that said "O/D OFF" appeared on my car and it's called "Overdrive-off indicator light". Can anyone tell me what it is and what cause it appear that suddenly ?
Asked by missybitsy - Sun Sep 9 16:55:44 2007 - - 4 Answers - 0 Comments
A. Overdrive doesn't have anything to do with the engine. It does have to do with the transmission. It gives you the option of moving slower with more power, or faster with less. The control is usually on the gearshift. You, or a passenger, probably bumped it.
Answered by Brooke B - Sun Sep 9 17:06:44 2007
How good of an indicator to sexual attraction is porn?
Q. How good of an indicator to sexual attraction is porn? What do you think? Can I tell my sexual attraction or orientation through it? Thanks.
Asked by AnthonyNunyaBusiness - Thu May 6 19:34:29 2010 - - 8 Answers - 0 Comments
A. Regardless of the few posts I've seen to the contrary, I would have to say that it's a pretty darn good indicator. And for those who claim otherwise, that closet is going to get uncomfortable sooner or later.
Answered by Clint - Thu May 6 20:01:27 2010
Q. How good of an indicator to sexual attraction is porn? What do you think? Can I tell my sexual attraction or orientation through it? Thanks.
Asked by AnthonyNunyaBusiness - Thu May 6 19:34:29 2010 - - 8 Answers - 0 Comments
A. Regardless of the few posts I've seen to the contrary, I would have to say that it's a pretty darn good indicator. And for those who claim otherwise, that closet is going to get uncomfortable sooner or later.
Answered by Clint - Thu May 6 20:01:27 2010
Why is my turn indicator blinking faster on the right side than the left?
Q. My right side indicator suddenly started blinking faster. However, when I pulled into my parking space and before I turned off the car, I tried it again and it was normal. I know that on another car when the taillight went out it caused the blinker to just stay steady - no blinking at all. A simple bulb change cured that. What could my problem be? It's a '97 Jetta, if that makes a difference.
Asked by Tina R - Mon Jul 21 09:22:07 2008 - - 5 Answers - 0 Comments
A. i think it means either the front or back light is out so turn it on and get out of the car and have a look
Answered by Sweet_Kisses xoxo - Mon Jul 21 09:25:01 2008
Q. My right side indicator suddenly started blinking faster. However, when I pulled into my parking space and before I turned off the car, I tried it again and it was normal. I know that on another car when the taillight went out it caused the blinker to just stay steady - no blinking at all. A simple bulb change cured that. What could my problem be? It's a '97 Jetta, if that makes a difference.
Asked by Tina R - Mon Jul 21 09:22:07 2008 - - 5 Answers - 0 Comments
A. i think it means either the front or back light is out so turn it on and get out of the car and have a look
Answered by Sweet_Kisses xoxo - Mon Jul 21 09:25:01 2008
Why does my bright light indicator not work?
Q. I have a 2004 Chevy Cavalier and when I turn on the bright lights the little indicator light on the dash doesn't light up. Every other light, gauge, and indicator light work fine, but for some reason the bright light indicator doesn't come on at all. Why is this?
Asked by jgr316 - Wed Dec 16 20:33:59 2009 - - 6 Answers - 0 Comments
A. Most likely the bulb.
Answered by Mark - Wed Dec 16 20:40:51 2009
Q. I have a 2004 Chevy Cavalier and when I turn on the bright lights the little indicator light on the dash doesn't light up. Every other light, gauge, and indicator light work fine, but for some reason the bright light indicator doesn't come on at all. Why is this?
Asked by jgr316 - Wed Dec 16 20:33:59 2009 - - 6 Answers - 0 Comments
A. Most likely the bulb.
Answered by Mark - Wed Dec 16 20:40:51 2009
Why does the indicator light for my transmission not work?
Q. I have a 1995 Z71 Silverado and when the ignition is in the on position the indicator light works. When I crank the engine the indicator light stops working. I heard that this is because of the ignition switch and I'm really hoping that's not the case.
Asked by Matt - Sat Jun 20 20:40:23 2009 - - 1 Answers - 0 Comments
A. when the light is off that means you have no problems, when it is on they you have a problem...
Answered by People are idiots - Sat Jun 20 20:49:13 2009
Q. I have a 1995 Z71 Silverado and when the ignition is in the on position the indicator light works. When I crank the engine the indicator light stops working. I heard that this is because of the ignition switch and I'm really hoping that's not the case.
Asked by Matt - Sat Jun 20 20:40:23 2009 - - 1 Answers - 0 Comments
A. when the light is off that means you have no problems, when it is on they you have a problem...
Answered by People are idiots - Sat Jun 20 20:49:13 2009
Where can I find information about indicator plants?
Q. I'm trying to do a school project on indicator plants. (eg: clover indicates low nitrogen on the soil) (i think) maybe that was a bad example, but that's kind of what I'm looking for, in other words how the presence of certain plants tell you things about the soil or environment. I went to the library but I couldn't find much. Can anybody point me in the right direction? I'm shooting blanks here.
Asked by Puffy - Mon May 19 18:33:08 2008 - - 1 Answers - 0 Comments
A. I know more about plants being wetland indicators (I used to work doing wetland delineations) so I'll post some info for you about that. I also found these websites, which seem to be more along the lines of what you're asking about: - use the lists on the left to find species - the links will tell you what each is an indicator of Plants also have preferences as to how "wet" of a soil they'll grow in. Some, like cattails, are always found in wetlands and are considered "obligate" wetland plants. Others are never found in wetlands, and are considered "upland" species. And a lot fall in between, and are classified as to how likely it would be to find them in a wetland. This link explains the categories: These plants are used… [cont.]
Answered by Dean M. - Tue May 20 01:27:52 2008
Q. I'm trying to do a school project on indicator plants. (eg: clover indicates low nitrogen on the soil) (i think) maybe that was a bad example, but that's kind of what I'm looking for, in other words how the presence of certain plants tell you things about the soil or environment. I went to the library but I couldn't find much. Can anybody point me in the right direction? I'm shooting blanks here.
Asked by Puffy - Mon May 19 18:33:08 2008 - - 1 Answers - 0 Comments
A. I know more about plants being wetland indicators (I used to work doing wetland delineations) so I'll post some info for you about that. I also found these websites, which seem to be more along the lines of what you're asking about: - use the lists on the left to find species - the links will tell you what each is an indicator of Plants also have preferences as to how "wet" of a soil they'll grow in. Some, like cattails, are always found in wetlands and are considered "obligate" wetland plants. Others are never found in wetlands, and are considered "upland" species. And a lot fall in between, and are classified as to how likely it would be to find them in a wetland. This link explains the categories: These plants are used… [cont.]
Answered by Dean M. - Tue May 20 01:27:52 2008
What is the purpose of the colored indicator lights in the ceiling of the cabin of a commercial jet?
Q. In some commercial airliners, you can see a row (usually four?) of indicator lights of different colors. At some times, some of them are on, at other times none. What is the purpose of these lights?
Asked by Baloo K - Thu Nov 12 05:04:56 2009 - - 3 Answers - 0 Comments
A. I am suspicious you are asking about interior lights. There are several bars of muted colored lights near the top of the cabin. They generally indicate the source of calls to the flight attendant. Pink indicates a crew intercom call, white indicates that a passenger has activated a FA call button. A blue light sometimes illuminates when the corresponding lav is occupied. A separate lone blue light located near the front means that the pilots are in a more serious stage of flight (usually departure, approach, or landing) and the flight attendants should only call in the event of an emergency.
Answered by Sarastro - Thu Nov 12 08:27:21 2009
Q. In some commercial airliners, you can see a row (usually four?) of indicator lights of different colors. At some times, some of them are on, at other times none. What is the purpose of these lights?
Asked by Baloo K - Thu Nov 12 05:04:56 2009 - - 3 Answers - 0 Comments
A. I am suspicious you are asking about interior lights. There are several bars of muted colored lights near the top of the cabin. They generally indicate the source of calls to the flight attendant. Pink indicates a crew intercom call, white indicates that a passenger has activated a FA call button. A blue light sometimes illuminates when the corresponding lav is occupied. A separate lone blue light located near the front means that the pilots are in a more serious stage of flight (usually departure, approach, or landing) and the flight attendants should only call in the event of an emergency.
Answered by Sarastro - Thu Nov 12 08:27:21 2009
What should I do to buy inexpensive indicator holders with cheap delivery?
Q. I've got a trouble. I want to get indicator holders but I haven't found any good offer. Either price is pretty high or the delivery is too expensive. Maybe you can advice me a source which as cheap shipping. I'm looking forward to your answers!
Asked by cerbberi - Thu Jul 1 01:39:41 2010 - - 1 Answers - 0 Comments
A. Cheap shipping, good prices and big variety of indicator holders. There you can find all you need.
Answered by Paul - Thu Jul 1 23:32:59 2010
Q. I've got a trouble. I want to get indicator holders but I haven't found any good offer. Either price is pretty high or the delivery is too expensive. Maybe you can advice me a source which as cheap shipping. I'm looking forward to your answers!
Asked by cerbberi - Thu Jul 1 01:39:41 2010 - - 1 Answers - 0 Comments
A. Cheap shipping, good prices and big variety of indicator holders. There you can find all you need.
Answered by Paul - Thu Jul 1 23:32:59 2010
What is causing my RPM indicator to not work?
Q. What can be causing the RPM indicator to not work on my car. When I start it up, the indicator works fine, but after a while of driving, I notice it doesn't move and stays on 0. What could be a possible cause for this... and no I'm not driving a Toyota! My car is a 2003 Nissan Altima with less the 61K miles.
Asked by Jack V - Mon Mar 15 14:55:25 2010 - - 2 Answers - 0 Comments
A. probably a loose or shorted wire.
Answered by mister ss - Mon Mar 15 20:12:25 2010
Q. What can be causing the RPM indicator to not work on my car. When I start it up, the indicator works fine, but after a while of driving, I notice it doesn't move and stays on 0. What could be a possible cause for this... and no I'm not driving a Toyota! My car is a 2003 Nissan Altima with less the 61K miles.
Asked by Jack V - Mon Mar 15 14:55:25 2010 - - 2 Answers - 0 Comments
A. probably a loose or shorted wire.
Answered by mister ss - Mon Mar 15 20:12:25 2010
How and Why does a pH indicator like the juice extracted from Red Cabbage change its color?
Q. I would like to the the chemical changes that occur when acids like acetic acid and citrus acid or bases like sodium bicarbonate are added to the pH indicator which is extracted from red cabbage. The indicator changes color but I want to know How and Why and what causes it to change color.
Asked by Neil - Wed Mar 3 05:24:28 2010 - - 1 Answers - 0 Comments
A. Basically it is the same as any other acid-base indicator. The indicator colour is a weak acid ... represent as HIn The equilbria is HIn <---> H+ + In- colour 1 colour 2 The undissociated acid HIn has one colour, and the ion In- another [and colour mixes inbetween] If you have done Le Chateliers Principle you will understand how adding acid or base will shift the equilbria left or right respectively giving the two different colours.
Answered by Colin - Wed Mar 3 12:29:56 2010
Q. I would like to the the chemical changes that occur when acids like acetic acid and citrus acid or bases like sodium bicarbonate are added to the pH indicator which is extracted from red cabbage. The indicator changes color but I want to know How and Why and what causes it to change color.
Asked by Neil - Wed Mar 3 05:24:28 2010 - - 1 Answers - 0 Comments
A. Basically it is the same as any other acid-base indicator. The indicator colour is a weak acid ... represent as HIn The equilbria is HIn <---> H+ + In- colour 1 colour 2 The undissociated acid HIn has one colour, and the ion In- another [and colour mixes inbetween] If you have done Le Chateliers Principle you will understand how adding acid or base will shift the equilbria left or right respectively giving the two different colours.
Answered by Colin - Wed Mar 3 12:29:56 2010
How do I get my speaker indicator lights to acknowledge my speakers on the Yamaha RX V663?
Q. I recently hooked up a 5.1 system to my RX V663 A/V. The speakers all work and sound great, but the speaker indicator lights only light up for the front speakers when using all 5. I'm stumped! Also the indicator lights do work when I run the set up procedure.
Asked by Jim D - Fri Nov 14 03:48:42 2008 - - 2 Answers - 0 Comments
A. That is not really a speaker indicator. It is a signal indicator. It is currently showing you a 2.0 signal or stereo. If it gets a 5.1 signal like from a DVD player through digital cable they will all light up.
Answered by Theaterhelp - Fri Nov 14 10:51:47 2008
Q. I recently hooked up a 5.1 system to my RX V663 A/V. The speakers all work and sound great, but the speaker indicator lights only light up for the front speakers when using all 5. I'm stumped! Also the indicator lights do work when I run the set up procedure.
Asked by Jim D - Fri Nov 14 03:48:42 2008 - - 2 Answers - 0 Comments
A. That is not really a speaker indicator. It is a signal indicator. It is currently showing you a 2.0 signal or stereo. If it gets a 5.1 signal like from a DVD player through digital cable they will all light up.
Answered by Theaterhelp - Fri Nov 14 10:51:47 2008
How full bag/cup indicator work inside a vacuum cleaner?
Q. I would like to know the working principles of a full bag/cup indicator inside a vacuum cleaner THX~~
Asked by Seafish - Tue Feb 13 01:51:43 2007 - - 2 Answers - 1 Comments
A. I would assume most work by measuring the flow of air. As it fills less air gets thru. I had one that a button would turn red when it was full. And if the filters needed to be cleaned the red button would pop up even the canister was not full.
Answered by gnomes31 - Tue Feb 13 02:00:53 2007
Q. I would like to know the working principles of a full bag/cup indicator inside a vacuum cleaner THX~~
Asked by Seafish - Tue Feb 13 01:51:43 2007 - - 2 Answers - 1 Comments
A. I would assume most work by measuring the flow of air. As it fills less air gets thru. I had one that a button would turn red when it was full. And if the filters needed to be cleaned the red button would pop up even the canister was not full.
Answered by gnomes31 - Tue Feb 13 02:00:53 2007
What is a good indicator to use to confirm a stock is breaking out?
Q. I want to buy stocks just as they breakout so what technical indicator(s) can i use to pick stocks breaking out??
Asked by Stockwillrise - Sun Apr 5 15:49:43 2009 - - 3 Answers - 0 Comments
A. Technical indicators you could look at could be things like ROE and ROA growth, EPS growth. If they are growing quickly and better than industry averages then chances are that the firm's stock are undervalued. However, for every one Microsoft there are thousands of firms that do not make it. One tip I have learned is that volume always tells the truth. If the stock moves up or down and the volume doesn't increase then it is probably a "head fake" (meaning that the stock will rebound in the opposite direction soon).
Answered by mjr072984 - Sun Apr 5 18:54:25 2009
Q. I want to buy stocks just as they breakout so what technical indicator(s) can i use to pick stocks breaking out??
Asked by Stockwillrise - Sun Apr 5 15:49:43 2009 - - 3 Answers - 0 Comments
A. Technical indicators you could look at could be things like ROE and ROA growth, EPS growth. If they are growing quickly and better than industry averages then chances are that the firm's stock are undervalued. However, for every one Microsoft there are thousands of firms that do not make it. One tip I have learned is that volume always tells the truth. If the stock moves up or down and the volume doesn't increase then it is probably a "head fake" (meaning that the stock will rebound in the opposite direction soon).
Answered by mjr072984 - Sun Apr 5 18:54:25 2009
How good of an indicator is CM to tell ovulation?
Q. I had eggwhite for a couple of days and since then I have had more than usual, a couple days of lotion type and now more watery (and lots). I was on the pill for almost 10 yrs so my cycles have been VERY irregular (which makes it hard to know what is going on). So do you guys think that a CM cycle like this is a good indicator that I did ovulate? Thanks for the help.
Asked by Christina M - Tue Mar 11 20:08:06 2008 - - 3 Answers - 0 Comments
A. Not always good, especially if you have a lot of sex and use lubricants. Sperm and KY can distort the look of your CM.
Answered by Shredder - Tue Mar 11 20:22:01 2008
Q. I had eggwhite for a couple of days and since then I have had more than usual, a couple days of lotion type and now more watery (and lots). I was on the pill for almost 10 yrs so my cycles have been VERY irregular (which makes it hard to know what is going on). So do you guys think that a CM cycle like this is a good indicator that I did ovulate? Thanks for the help.
Asked by Christina M - Tue Mar 11 20:08:06 2008 - - 3 Answers - 0 Comments
A. Not always good, especially if you have a lot of sex and use lubricants. Sperm and KY can distort the look of your CM.
Answered by Shredder - Tue Mar 11 20:22:01 2008
What is the relationship between VOR and heading indicator?
Q. I use Microsoft flight simulator and I am trying to teach my self the basics using Flight Simulator. I am slowly learning about VOR itself, but I am confused because sometimes my heading indicator does not show the heading my VOR indicator does.
Asked by nickgj - Tue Apr 21 08:47:50 2009 - - 3 Answers - 0 Comments
A. Navigating with the VOR is an abstract concept that many students struggle with. There are two types of VOR indicators. One version has a manual rotating azimuth card that you set yourself to match the desired VOR radial (course) you want to track inbound or outbound. The CDI (course deviation indicator) needle is fixed, straight up and down. This is pretty standard on light aircraft. The other type, known as a Horizontal Situation Indicator (HSI) superimposes a manually rotable CDI over top of a normal directional gyro. I'm guessing from your question that your FS airplane is not equipped with an HSI. So, in a nutshell, you must manually set the azimuth card on the VOR to match the VOR radial you want to track. Unless you happen to… [cont.]
Answered by Ben Dere Dun Dat - Tue Apr 21 13:21:23 2009
Q. I use Microsoft flight simulator and I am trying to teach my self the basics using Flight Simulator. I am slowly learning about VOR itself, but I am confused because sometimes my heading indicator does not show the heading my VOR indicator does.
Asked by nickgj - Tue Apr 21 08:47:50 2009 - - 3 Answers - 0 Comments
A. Navigating with the VOR is an abstract concept that many students struggle with. There are two types of VOR indicators. One version has a manual rotating azimuth card that you set yourself to match the desired VOR radial (course) you want to track inbound or outbound. The CDI (course deviation indicator) needle is fixed, straight up and down. This is pretty standard on light aircraft. The other type, known as a Horizontal Situation Indicator (HSI) superimposes a manually rotable CDI over top of a normal directional gyro. I'm guessing from your question that your FS airplane is not equipped with an HSI. So, in a nutshell, you must manually set the azimuth card on the VOR to match the VOR radial you want to track. Unless you happen to… [cont.]
Answered by Ben Dere Dun Dat - Tue Apr 21 13:21:23 2009
What is the Nissan Sentra indicator light on the passenger side of dashboard?
Q. I just bought a 2000 Sentra with no owner's manual. There is a little light mounted where the windshield meets the dash on the passenger side, and it blinks every few seconds when the car is off. What is it the indicator for? Passenger airbag, perhaps? If so, does blinking mean that it's functioning, or that it is NOT functioning?
Asked by sabrinajustison - Wed Oct 1 07:52:57 2008 - - 2 Answers - 0 Comments
A. it is probably just the alarm. it is warning people not to try enter your car..
Answered by Brandon L - Wed Oct 1 07:57:23 2008
Q. I just bought a 2000 Sentra with no owner's manual. There is a little light mounted where the windshield meets the dash on the passenger side, and it blinks every few seconds when the car is off. What is it the indicator for? Passenger airbag, perhaps? If so, does blinking mean that it's functioning, or that it is NOT functioning?
Asked by sabrinajustison - Wed Oct 1 07:52:57 2008 - - 2 Answers - 0 Comments
A. it is probably just the alarm. it is warning people not to try enter your car..
Answered by Brandon L - Wed Oct 1 07:57:23 2008
Which speed sensor controls the speed indicator on dash?
Q. I need to know exactly which speed sensor to replace because my '99 corolla's speed indicator is not working.
Asked by Miagi99 - Sat Jul 5 22:17:23 2008 - - 3 Answers - 0 Comments
A. That would be the VSS.
Answered by Will S - Sat Jul 5 22:21:04 2008
Q. I need to know exactly which speed sensor to replace because my '99 corolla's speed indicator is not working.
Asked by Miagi99 - Sat Jul 5 22:17:23 2008 - - 3 Answers - 0 Comments
A. That would be the VSS.
Answered by Will S - Sat Jul 5 22:21:04 2008
How do I disable the DRL indicator light on the dashboard?
Q. Just to be clear, I am asking about the indicator light inside the speedometer NOT the daytime running lights on the front of the vehicle.
Asked by pi - Thu Mar 8 22:47:42 2007 - - 2 Answers - 0 Comments
A. Only way to do it, is pull the instrument cluster and yank out the bulb. Pulling the fuse won't do the trick.
Answered by Hambone - Thu Mar 8 23:24:44 2007
Q. Just to be clear, I am asking about the indicator light inside the speedometer NOT the daytime running lights on the front of the vehicle.
Asked by pi - Thu Mar 8 22:47:42 2007 - - 2 Answers - 0 Comments
A. Only way to do it, is pull the instrument cluster and yank out the bulb. Pulling the fuse won't do the trick.
Answered by Hambone - Thu Mar 8 23:24:44 2007
What indicator would you use for colors that changed from blue to green to yellow?
Q. We did this lab and it slips my mind what the indicator would be? It's a Biology class and it was a plant-Animal relationship lab. Thanks!!!
Asked by Jackson S - Thu Nov 6 21:46:47 2008 - - 2 Answers - 0 Comments
A. bromocresol green
Answered by tttyner - Thu Nov 6 21:49:19 2008
Q. We did this lab and it slips my mind what the indicator would be? It's a Biology class and it was a plant-Animal relationship lab. Thanks!!!
Asked by Jackson S - Thu Nov 6 21:46:47 2008 - - 2 Answers - 0 Comments
A. bromocresol green
Answered by tttyner - Thu Nov 6 21:49:19 2008
What happens when you add too much indicator?
Q. If you are performing a titration, what would happen if you added too much indicator, say, phenolphthalein to the solution? Would it make it easier to detect the equivalence point of the reaction?
Asked by redundant redhead - Fri Apr 17 01:51:53 2009 - - 2 Answers - 0 Comments
A. Nothing much would change if you added too much indicator. The color will be more intense, but it will still change at the same pH range. It really won't help to see the endpoint. There is a downside though, albeit, a small one. An indicator is a weak acid, and some of the added base will go into reacting with the indicator. It's probably not enough to notice, but in some cases it might be.
Answered by pisgahchemist - Fri Apr 17 02:01:27 2009
Q. If you are performing a titration, what would happen if you added too much indicator, say, phenolphthalein to the solution? Would it make it easier to detect the equivalence point of the reaction?
Asked by redundant redhead - Fri Apr 17 01:51:53 2009 - - 2 Answers - 0 Comments
A. Nothing much would change if you added too much indicator. The color will be more intense, but it will still change at the same pH range. It really won't help to see the endpoint. There is a downside though, albeit, a small one. An indicator is a weak acid, and some of the added base will go into reacting with the indicator. It's probably not enough to notice, but in some cases it might be.
Answered by pisgahchemist - Fri Apr 17 02:01:27 2009
From Yahoo Answer Search: 'indicator'
Fri Jul 30 17:15:49 2010 [ refresh local cache ]
[Hide]▼
news.google.com
PR Newswire (press release)
CHICAGO, Jan. 6 /PRNewswire/ -- According to job postings on Sittercity.com, unemployment and the economy in the US look to be improving. ...
and more »
smartkpis.com
admin
Wed, 07 Jul 2010 04:23:12 GM
smartKPIs.com community can now select their Key Performance . Indicators. (KPIs) from over 3600 performance measures documented and published in the online repository. The team focused in the last month on publishing examples from the ...
[Hide]▲
