RCA TV, the menu starts up at ON switch. How can I get its Menu to stop at start up?
Q. I bought a Universal Control Box (to change channels and adjust volume), it has no effect on the RCA TV's menu. To TV Tech, I like your answer and I will try it. This is the second Television that we have experienced it with. Thanks for answering. I would reply directly, but Yahoo does not give me that opportunity!
Asked by Curious Anne - Fri Apr 24 05:24:31 2009 - - 2 Answers - 0 Comments
A. Wow...three trolls and one real guy. Getting kinda crowded here yahoo. Anyways, your problem is most likely caused by a stuck Menu button on your TV set. You have to unstick it. Now, if it's actually sticking, you can turn off the TV , unplug it, and take a bottle of isopropyl alcohol (70% or higher) and a toothbrush and scrub all the switches. That should remove any sticky substances between the buttons and the switches. Work the switches during cleaning so the alcoho-water blend can do it's magic. Wait 30 minutes before plugging it back in.
Answered by TV Tech 1 - Fri Apr 24 06:12:51 2009
Q. I bought a Universal Control Box (to change channels and adjust volume), it has no effect on the RCA TV's menu. To TV Tech, I like your answer and I will try it. This is the second Television that we have experienced it with. Thanks for answering. I would reply directly, but Yahoo does not give me that opportunity!
Asked by Curious Anne - Fri Apr 24 05:24:31 2009 - - 2 Answers - 0 Comments
A. Wow...three trolls and one real guy. Getting kinda crowded here yahoo. Anyways, your problem is most likely caused by a stuck Menu button on your TV set. You have to unstick it. Now, if it's actually sticking, you can turn off the TV , unplug it, and take a bottle of isopropyl alcohol (70% or higher) and a toothbrush and scrub all the switches. That should remove any sticky substances between the buttons and the switches. Work the switches during cleaning so the alcoho-water blend can do it's magic. Wait 30 minutes before plugging it back in.
Answered by TV Tech 1 - Fri Apr 24 06:12:51 2009
How can i remove Parent control from RCA TV model is f27442 i lost the original control ?
Q. How can i remove Parent control from RCA TV model is f27442 i lost the original control i have a cable TV controller please help thanks, any use full information is useful thank you.
Asked by Daniel M - Fri Oct 17 12:01:08 2008 - - 1 Answers - 0 Comments
A. Try to see if you can restore factory defaults. If you can't, call the service provider (if available) or manufacturer for a rest password. Good Luck
Answered by Bob T - Fri Oct 17 17:33:31 2008
Q. How can i remove Parent control from RCA TV model is f27442 i lost the original control i have a cable TV controller please help thanks, any use full information is useful thank you.
Asked by Daniel M - Fri Oct 17 12:01:08 2008 - - 1 Answers - 0 Comments
A. Try to see if you can restore factory defaults. If you can't, call the service provider (if available) or manufacturer for a rest password. Good Luck
Answered by Bob T - Fri Oct 17 17:33:31 2008
How do you fix lines on a RCA tv?
Q. I have an old RCA tv, from around the 80s. the tv worked perfectly for years but All of a sudden i have these diagonal lines that popped up on the tv and the sharpness is reduced. Also most of the control knobs on the back are broken off. So can i repair this myself, should I take it to a shop, or will it be too expensive, and should i just buy a new tv?
Asked by Queban H - Tue Nov 25 13:29:23 2008 - - 1 Answers - 0 Comments
A. Why spend money on an old TV, when it can go towards a new one. No guarantee that the old TV will last much longer. Do yourself a favor and get yourself a new one for the holidays.
Answered by gilphilloz - Tue Nov 25 22:05:59 2008
Q. I have an old RCA tv, from around the 80s. the tv worked perfectly for years but All of a sudden i have these diagonal lines that popped up on the tv and the sharpness is reduced. Also most of the control knobs on the back are broken off. So can i repair this myself, should I take it to a shop, or will it be too expensive, and should i just buy a new tv?
Asked by Queban H - Tue Nov 25 13:29:23 2008 - - 1 Answers - 0 Comments
A. Why spend money on an old TV, when it can go towards a new one. No guarantee that the old TV will last much longer. Do yourself a favor and get yourself a new one for the holidays.
Answered by gilphilloz - Tue Nov 25 22:05:59 2008
How do I fix my Rca Tv?
Q. Hello, I have an Rca Tv and some of the channels come in and some do not. Any help would be greatful.
Asked by sylvia E - Thu Mar 29 11:14:39 2007 - - 3 Answers - 0 Comments
A. It all depends on how old it is . it it electronic tuning or the old rotary style . if its a rotary it probably needs cleaning which means taking it a part and spraying the tuner .. a job not recommended for a do it yourself..That TV can kill you if you touch the wrong thing . it may store a charge for years so don't attempt it .. that's about 25,000 volts .. you'd be playing with . Now if its electronic i would think that somehow you have messed up the settings go to your menu and check to see if its set for air or cable or you could have some channels deleted most TVs have an auto scan feature that will automatically tune in on all channels it receives .. get out your users manual if you have one and read it .. if you don't have one… [cont.]
Answered by myopinionforwhatitsworth - Thu Mar 29 11:30:18 2007
Q. Hello, I have an Rca Tv and some of the channels come in and some do not. Any help would be greatful.
Asked by sylvia E - Thu Mar 29 11:14:39 2007 - - 3 Answers - 0 Comments
A. It all depends on how old it is . it it electronic tuning or the old rotary style . if its a rotary it probably needs cleaning which means taking it a part and spraying the tuner .. a job not recommended for a do it yourself..That TV can kill you if you touch the wrong thing . it may store a charge for years so don't attempt it .. that's about 25,000 volts .. you'd be playing with . Now if its electronic i would think that somehow you have messed up the settings go to your menu and check to see if its set for air or cable or you could have some channels deleted most TVs have an auto scan feature that will automatically tune in on all channels it receives .. get out your users manual if you have one and read it .. if you don't have one… [cont.]
Answered by myopinionforwhatitsworth - Thu Mar 29 11:30:18 2007
RCA Tv blinks green when i push the power button but won't turn on?
Q. I have an RCA w/vcr tv. Im tryin to turn it on but when i push the power button, It blinks green but will not turn on. Any ideas?
Asked by kimbrly815 - Mon Aug 24 22:14:40 2009 - - 3 Answers - 0 Comments
A. Maybe you are commanding the VCR, select the TV button and try again. Did you check the remote batteries?
Answered by Jorge - Tue Aug 25 00:26:25 2009
Q. I have an RCA w/vcr tv. Im tryin to turn it on but when i push the power button, It blinks green but will not turn on. Any ideas?
Asked by kimbrly815 - Mon Aug 24 22:14:40 2009 - - 3 Answers - 0 Comments
A. Maybe you are commanding the VCR, select the TV button and try again. Did you check the remote batteries?
Answered by Jorge - Tue Aug 25 00:26:25 2009
How do I program my RCA tv to my RCA Scenium DVD player so that it plays a DVD?
Q. I have a Model DRS 7000 RCA Scenium DVD player/recorder and since I've moved, I haven't been able to get the tv and scenium to communicate. Any ideas or suggestions?
Asked by Suzi S - Sun Oct 29 12:16:42 2006 - - 1 Answers - 0 Comments
A. did you use Scenium DVD player/recorder line output to the line input on the TV
Answered by jojo - Wed Nov 1 12:45:18 2006
Q. I have a Model DRS 7000 RCA Scenium DVD player/recorder and since I've moved, I haven't been able to get the tv and scenium to communicate. Any ideas or suggestions?
Asked by Suzi S - Sun Oct 29 12:16:42 2006 - - 1 Answers - 0 Comments
A. did you use Scenium DVD player/recorder line output to the line input on the TV
Answered by jojo - Wed Nov 1 12:45:18 2006
Do I need a Coaxle to RCA adapter for my TV if the coaxle input on the back is broken?
Q. Was cleaning, TV fell on floor, ripped out the back connection for cable TV. RCA inputs still work fine on the TV, is there any adapter made from cable to RCA? Or do I need to just have the cable input fixed? I know that will probably be costly.
Asked by Matt Dibble - Tue Mar 25 15:41:59 2008 - - 1 Answers - 0 Comments
A. There is no adapter. You need some kind of tuner. If all you need is analog TV, use a VCR as a tuner.
Answered by jjki_11738 - Tue Mar 25 15:50:29 2008
Q. Was cleaning, TV fell on floor, ripped out the back connection for cable TV. RCA inputs still work fine on the TV, is there any adapter made from cable to RCA? Or do I need to just have the cable input fixed? I know that will probably be costly.
Asked by Matt Dibble - Tue Mar 25 15:41:59 2008 - - 1 Answers - 0 Comments
A. There is no adapter. You need some kind of tuner. If all you need is analog TV, use a VCR as a tuner.
Answered by jjki_11738 - Tue Mar 25 15:50:29 2008
how to i hook up a RCA tv to my stereo?
Q. I have an older model rca tv about 5 yrs old. My stereo has a mini aux plug and i bought the connect with the mini plug on one end and the L R audio on the other. I plugged it in and it does not work!!! I read the manual and i can't find how to do it. the model of the the tv is F25442 and my stereo is a jvc MX-KC48 compact stereo unit. I tried the same thing with my dvd player to stereo and it works perfectly so it's not the cable...
Asked by danie7 - Sat Jun 9 20:11:40 2007 - - 1 Answers - 0 Comments
A. If I undersantd your question correctly, you are trying to run the red/white RCA connectors from your tv to your stere 1/8" jack. The LR audio on your tv are most likely inputs, not outputs. That means it receives sound from devices like a vcr, it does not emit sound out to devices such as a receiver. Most standard TV's (especially older) do not have audio outputs (unless they were the big consoles). If it is an output, it will say so. If it has no markings, it is most likely an input.
Answered by nicolasraage - Sat Jun 9 22:23:53 2007
Q. I have an older model rca tv about 5 yrs old. My stereo has a mini aux plug and i bought the connect with the mini plug on one end and the L R audio on the other. I plugged it in and it does not work!!! I read the manual and i can't find how to do it. the model of the the tv is F25442 and my stereo is a jvc MX-KC48 compact stereo unit. I tried the same thing with my dvd player to stereo and it works perfectly so it's not the cable...
Asked by danie7 - Sat Jun 9 20:11:40 2007 - - 1 Answers - 0 Comments
A. If I undersantd your question correctly, you are trying to run the red/white RCA connectors from your tv to your stere 1/8" jack. The LR audio on your tv are most likely inputs, not outputs. That means it receives sound from devices like a vcr, it does not emit sound out to devices such as a receiver. Most standard TV's (especially older) do not have audio outputs (unless they were the big consoles). If it is an output, it will say so. If it has no markings, it is most likely an input.
Answered by nicolasraage - Sat Jun 9 22:23:53 2007
How do I have "surround" sound with new RCA TruFlat tv and existing stereo?
Q. I was just given an RCA TruFlat tv (built in vcr and dvd) as a gift. My (very) old tv, older stereo and vcr were all hooked up together and I could have "surround" sound thru the stereo and it worked pretty well. I want to do the same thing with the new tv without buying a whole expensive system. The tv instructions say it won't work with something that has built in DTS. I'm assuming that's my stereo. (I don't have cable or satellite) What are my options? Can I buy an inexpensive av amplifier (?) and just hook the tv and stereo to that? Good answer Jefferson! But I guess I negelected to mention that I tried that and it didn't work. What did I do wrong then?
Asked by dlm3300 - Sun Dec 24 10:43:44 2006 - - 2 Answers - 0 Comments
A. Uh, huh. Well, here's the thing. You have a "stereo" which means "stereo" not "surround". You will then be limited to hooking up the red and white RCA outs of the TV, VCR, DVD, whatever, and into the amplifier and playing back through the speakers. DTS is an encoding yes, but it will not interfere with the analog playback of the TV, or the playback through the stereo. Solution. Dude, step up. Put the "stereo" in the garage, get an inexpensive true surround system, even the theater in a box is fine for your application, and be done with it. The 70's are over my friend.
Answered by RyanLeeDesign - Sun Dec 24 11:56:33 2006
Q. I was just given an RCA TruFlat tv (built in vcr and dvd) as a gift. My (very) old tv, older stereo and vcr were all hooked up together and I could have "surround" sound thru the stereo and it worked pretty well. I want to do the same thing with the new tv without buying a whole expensive system. The tv instructions say it won't work with something that has built in DTS. I'm assuming that's my stereo. (I don't have cable or satellite) What are my options? Can I buy an inexpensive av amplifier (?) and just hook the tv and stereo to that? Good answer Jefferson! But I guess I negelected to mention that I tried that and it didn't work. What did I do wrong then?
Asked by dlm3300 - Sun Dec 24 10:43:44 2006 - - 2 Answers - 0 Comments
A. Uh, huh. Well, here's the thing. You have a "stereo" which means "stereo" not "surround". You will then be limited to hooking up the red and white RCA outs of the TV, VCR, DVD, whatever, and into the amplifier and playing back through the speakers. DTS is an encoding yes, but it will not interfere with the analog playback of the TV, or the playback through the stereo. Solution. Dude, step up. Put the "stereo" in the garage, get an inexpensive true surround system, even the theater in a box is fine for your application, and be done with it. The 70's are over my friend.
Answered by RyanLeeDesign - Sun Dec 24 11:56:33 2006
I need repair parts for my old RCA TV Model G26231TN where can i order these from?
Q. The picture is really distorted -wavy lines and such and any words on the screen are impossible to read. Great TV had since late 80's and never any repairs needed.
Asked by B C - Sat Sep 22 17:42:45 2007 - - 1 Answers - 0 Comments
A. If it's the chassis I'm thinking of! Those old RCA's usually needed the focus setup ( which is not a hard job to do & also the sharpness control sticking out the back of the chassis also used to have a dirty control.
Answered by Mike B - Sat Sep 22 22:36:21 2007
Q. The picture is really distorted -wavy lines and such and any words on the screen are impossible to read. Great TV had since late 80's and never any repairs needed.
Asked by B C - Sat Sep 22 17:42:45 2007 - - 1 Answers - 0 Comments
A. If it's the chassis I'm thinking of! Those old RCA's usually needed the focus setup ( which is not a hard job to do & also the sharpness control sticking out the back of the chassis also used to have a dirty control.
Answered by Mike B - Sat Sep 22 22:36:21 2007
How do I fix an RCA tv with no picture showing at all?
Q. The other morning while my husband was watching tv it just shut off on him. Now every time we turn it on there is no picture. We cant seem to figure out what is wrong with it.
Asked by avalent_119 - Sat Jun 7 16:27:52 2008 - - 1 Answers - 0 Comments
A. Is it set to the correct input? Is there power going to the set? If the answer is yes to either of these then you have to call a serviceman.
Answered by lvgeno - Sat Jun 7 16:36:44 2008
Q. The other morning while my husband was watching tv it just shut off on him. Now every time we turn it on there is no picture. We cant seem to figure out what is wrong with it.
Asked by avalent_119 - Sat Jun 7 16:27:52 2008 - - 1 Answers - 0 Comments
A. Is it set to the correct input? Is there power going to the set? If the answer is yes to either of these then you have to call a serviceman.
Answered by lvgeno - Sat Jun 7 16:36:44 2008
Is there a way to my media center remote work with my RCA TV?
Q. It turns my xbox 360 off and on, but how do I make it work with my tv?
Asked by Mike3st - Mon Feb 26 18:33:21 2007 - - 1 Answers - 0 Comments
A. Email me the owner's manual of the media center remote, and I'll figure it out for you. RCA doesn't have any unique codes, so it should be relatively easy to figure out.
Answered by Mr. Peachy - Mon Feb 26 22:16:25 2007
Q. It turns my xbox 360 off and on, but how do I make it work with my tv?
Asked by Mike3st - Mon Feb 26 18:33:21 2007 - - 1 Answers - 0 Comments
A. Email me the owner's manual of the media center remote, and I'll figure it out for you. RCA doesn't have any unique codes, so it should be relatively easy to figure out.
Answered by Mr. Peachy - Mon Feb 26 22:16:25 2007
RCA TV Repair - No Picture or Sound - How Do I Repair It Electronically?
Q. When I turn on this TV I hear only a pitched kind of sound. A few tips in the right direction should help.
Asked by Bryan W - Sun Feb 15 08:15:03 2009 - - 2 Answers - 0 Comments
A. I was repairing an RCA TV this afternoon that had a similar problem. You need to measure the resistance across any two pins after removing the horizontal transistor. Check that the values are minimum 200 ohms
Answered by Green Glass - Sun Feb 15 09:05:03 2009
Q. When I turn on this TV I hear only a pitched kind of sound. A few tips in the right direction should help.
Asked by Bryan W - Sun Feb 15 08:15:03 2009 - - 2 Answers - 0 Comments
A. I was repairing an RCA TV this afternoon that had a similar problem. You need to measure the resistance across any two pins after removing the horizontal transistor. Check that the values are minimum 200 ohms
Answered by Green Glass - Sun Feb 15 09:05:03 2009
What should I do if my RCA xl100 tv is only staying on channel 3?
Q. So I left my lil bro in my room watching tv but when I came back the tv was messed up. Every time I tried to change the channel it only stayed on channel 3, so is there like a way I can reset the tv back to normal? ___ RCA XL100, the commercial skip one___
Asked by God Is Good - Wed Jun 24 11:57:23 2009 - - 1 Answers - 0 Comments
A. Rent a cable box from the cable company...
Answered by TV Tech 1 - Sun Jun 28 11:41:27 2009
Q. So I left my lil bro in my room watching tv but when I came back the tv was messed up. Every time I tried to change the channel it only stayed on channel 3, so is there like a way I can reset the tv back to normal? ___ RCA XL100, the commercial skip one___
Asked by God Is Good - Wed Jun 24 11:57:23 2009 - - 1 Answers - 0 Comments
A. Rent a cable box from the cable company...
Answered by TV Tech 1 - Sun Jun 28 11:41:27 2009
Will a Wii work on an RCA analog tv bought in 2007?
Q. My parents bought an RCA analog tv back in 2007 and I was wondering if the Wii could work with that? Or do the Wii's just work with digital TV's. It would bummer if thats the case. Does anyone know for sure?
Asked by Shawna B - Mon Mar 2 00:49:07 2009 - - 3 Answers - 0 Comments
A. As long as your TV has the yellow, red, and white plugs, then the Wii will work on it. I'd be shocked if the Wii didn't work on a TV that was made in 2007.
Answered by superdork - Mon Mar 2 00:56:34 2009
Q. My parents bought an RCA analog tv back in 2007 and I was wondering if the Wii could work with that? Or do the Wii's just work with digital TV's. It would bummer if thats the case. Does anyone know for sure?
Asked by Shawna B - Mon Mar 2 00:49:07 2009 - - 3 Answers - 0 Comments
A. As long as your TV has the yellow, red, and white plugs, then the Wii will work on it. I'd be shocked if the Wii didn't work on a TV that was made in 2007.
Answered by superdork - Mon Mar 2 00:56:34 2009
How can I fix my RCA projection TV?
Q. I have a RCA R52WH74 Projection HDTV. Today I was watching TV and all of a sudden it starting showing the three HD colors. Everything was showing up in red, blue and green. The top and bottom of the picture are also curved inward. It is the same on every input. What can i do?
Asked by Vash - Sun Jun 28 19:00:24 2009 - - 2 Answers - 1 Comments
A. When the three colors are not aligned, the TV is said to be out of convergence. While there are user controls on the TV to adjust convergence, it sounds to me like you have a hardware problem which won't be solved so easily. Definitely try the convergence operation in the TV's menus just in case you get lucky; you have nothing to lose by trying. But failing that, you have a repair job on your hands. RPTVs have a set of integrated circuits called Convergence ICs and associated circuitry. Something on your convergence board has blown and needs replacing. It might be a chip or some other component on the board. It's a job for a professional to troubleshoot the board and determine what's blown.
Answered by Rocket J Squirrel - Sun Jun 28 19:07:51 2009
Q. I have a RCA R52WH74 Projection HDTV. Today I was watching TV and all of a sudden it starting showing the three HD colors. Everything was showing up in red, blue and green. The top and bottom of the picture are also curved inward. It is the same on every input. What can i do?
Asked by Vash - Sun Jun 28 19:00:24 2009 - - 2 Answers - 1 Comments
A. When the three colors are not aligned, the TV is said to be out of convergence. While there are user controls on the TV to adjust convergence, it sounds to me like you have a hardware problem which won't be solved so easily. Definitely try the convergence operation in the TV's menus just in case you get lucky; you have nothing to lose by trying. But failing that, you have a repair job on your hands. RPTVs have a set of integrated circuits called Convergence ICs and associated circuitry. Something on your convergence board has blown and needs replacing. It might be a chip or some other component on the board. It's a job for a professional to troubleshoot the board and determine what's blown.
Answered by Rocket J Squirrel - Sun Jun 28 19:07:51 2009
I need a replacement remote for my RCA F32648 tv. How do I know if one I look at will work?
Q. All of the part numbers are different... My tv is a F32648 RCA and the remote I am looking at to replace the one that broke is rca ge remote control for TV (RCR160TALM1). HELP! I do not want to get a cheap universal at WalMart since the last time I tried that I was not able to get all of the menu options for the tv. This "new" one looks almost exactly like the one I have except it is silver not black.
Asked by kat2800 - Mon Mar 26 21:18:14 2007 - - 4 Answers - 0 Comments
A. I have some 4 & 3 digit codes to program into that RCA remote you are looking to buy. These are codes for RCA TVs : 0047, 1447, 0018, 0019, 0090, 0135, 0679, 0747, 1047, 1147, 1247, 1347, 1547. Three digit ones : 000, 006, 011, 019, 027, 034, 038, 044, 046, 088. I hope one of those will make that remote run your TV. Good Luck.
Answered by The Count - Tue Mar 27 13:31:17 2007
Q. All of the part numbers are different... My tv is a F32648 RCA and the remote I am looking at to replace the one that broke is rca ge remote control for TV (RCR160TALM1). HELP! I do not want to get a cheap universal at WalMart since the last time I tried that I was not able to get all of the menu options for the tv. This "new" one looks almost exactly like the one I have except it is silver not black.
Asked by kat2800 - Mon Mar 26 21:18:14 2007 - - 4 Answers - 0 Comments
A. I have some 4 & 3 digit codes to program into that RCA remote you are looking to buy. These are codes for RCA TVs : 0047, 1447, 0018, 0019, 0090, 0135, 0679, 0747, 1047, 1147, 1247, 1347, 1547. Three digit ones : 000, 006, 011, 019, 027, 034, 038, 044, 046, 088. I hope one of those will make that remote run your TV. Good Luck.
Answered by The Count - Tue Mar 27 13:31:17 2007
how do i get my sound to work on my flat screen tv using rca cables?
Q. i have an hp dvt9700 laptop, it has a vga output, so i plugged that into my lg flat screen tv and i change inputs to rgb-pc and the video works perfectly. i see everything on my computer and etc. i bought an rca cable to plug into my headphone jack and i plug it into my tv and no sound is coming out, what do i do?
Asked by justin y - Sun Jun 8 23:45:55 2008 - - 2 Answers - 0 Comments
A. did you make sure that you plugged it into the same input as the video input? did you make sure nothing to muted or the volume isn't just down on the laptop?..either that. or maybe the audio levels from the laptop aren't strong enough to be played through tv speakers without an amp.
Answered by spoolingturbo - Mon Jun 9 00:41:11 2008
Q. i have an hp dvt9700 laptop, it has a vga output, so i plugged that into my lg flat screen tv and i change inputs to rgb-pc and the video works perfectly. i see everything on my computer and etc. i bought an rca cable to plug into my headphone jack and i plug it into my tv and no sound is coming out, what do i do?
Asked by justin y - Sun Jun 8 23:45:55 2008 - - 2 Answers - 0 Comments
A. did you make sure that you plugged it into the same input as the video input? did you make sure nothing to muted or the volume isn't just down on the laptop?..either that. or maybe the audio levels from the laptop aren't strong enough to be played through tv speakers without an amp.
Answered by spoolingturbo - Mon Jun 9 00:41:11 2008
My 57' RCA tv went dark and had a static sound and wont come back on does anyone know what happened?
Q. I was watching tv last night and it just went out with a static sound. I don't know what happen. Can anyone tell me?
Asked by fourboyz2007 - Sun Sep 13 10:19:40 2009 - - 1 Answers - 0 Comments
A. Sounds like your tuner quit on you. You'll need a new one. Unless of course your TV set is DEAD...then that's a whole different problem. Most likely the SSB board will fix either problem.
Answered by TV Tech 1 - Sun Sep 13 13:46:46 2009
Q. I was watching tv last night and it just went out with a static sound. I don't know what happen. Can anyone tell me?
Asked by fourboyz2007 - Sun Sep 13 10:19:40 2009 - - 1 Answers - 0 Comments
A. Sounds like your tuner quit on you. You'll need a new one. Unless of course your TV set is DEAD...then that's a whole different problem. Most likely the SSB board will fix either problem.
Answered by TV Tech 1 - Sun Sep 13 13:46:46 2009
How to connect my home theatre system to my tv via rca.?
Q. I have a Philips Hts 3011,and i have a sony tv with video out (rca) and coaxil.I also have a cable box with rca and coaxil.I want to know how to connect hts to tv via audio cable to hear sound while watching tv not a dvd.i tried connecting audio (red and white cables) to my tv and it did not work.Please help.
Asked by Chandini - Tue Dec 22 19:43:38 2009 - - 1 Answers - 0 Comments
A. Connect red and white cables from cable box to sound system for audio.
Answered by BANG P - Wed Dec 23 07:29:06 2009
Q. I have a Philips Hts 3011,and i have a sony tv with video out (rca) and coaxil.I also have a cable box with rca and coaxil.I want to know how to connect hts to tv via audio cable to hear sound while watching tv not a dvd.i tried connecting audio (red and white cables) to my tv and it did not work.Please help.
Asked by Chandini - Tue Dec 22 19:43:38 2009 - - 1 Answers - 0 Comments
A. Connect red and white cables from cable box to sound system for audio.
Answered by BANG P - Wed Dec 23 07:29:06 2009
From Yahoo Answer Search: 'rca tv'
Sun Dec 27 17:00:56 2009 [ refresh local cache ]
[Hide]▼
flickr.com
(JennRation Design)
Wed, 08 Jul 2009 02:00:35 GM
elminotaur says: Amazing that the . RCA. Victor advertisements were kept and not painted over!~ Posted 2 months ago. ( permalink ). Would you like to comment? Sign up for a free account, or sign in (if you're already a member). ...
[Hide]▲
